• TTE® riding hall

    Strongly reduced build-up of dust due to the effective water storage.

  • Wear reduction of the riding hall floor

    The impact dampening construction principle leads to a strong reduction in wear on the horses’ joints and the structure.

  • TTE® is ToTally Simple (ToTal Einfach in German)

    TTE® is suitable due to the simple handling, ideal as a self-build. Your riding hall floor can be realised yourself, simply and quickly.

  • Riding hall Scheuerhof (more photographs)

    TTE® prevents ground compaction through load distribution and thus creates permanently impact dampening surfaces for healthy training of your horses.

equestrian sport & keeping of animals

TTE® riding hall

Riding comfort with water storage - the riding hall floor as a self-build

  • Applying the bedding (optional a wood chip elastic layer)
  • Lay TTE® (paddock plate) on a fine network
  • Filling the chambers and applying the treading layer
TTE®-MultiDrain PLUS 4000

TTE®-MultiDrainPLUS 4000
closed base
with ca. 30 l/m2 empty chamber

  • TTE® is significantly more stable than other riding arena plates and light grids
  • the system replaces the base course layer (no excavation & compaction)
  • an impact dampening/easy on the joints construction principle => construction hard onto soft (natural soil)
  • strongly reduced build-up of dust due to the effective water storage of 8 litres/m2 (when filling with sand)
  • removal of excess water by the spaces between the joints
  • residue-free removal and a high resale value (about 50% after 5 years) simple and quick implementation - possible as a self-build
  • the highest riding comfort for dressage, jumping and Western arenas

Elastic layer made out of wood chip

  • the interlocking and load distribution of the TTE® elements allow overbuilding of an elastic layer
  • the increased impact dampening leads to increased wear-reduction on the joints and system
  • the elastic layer also insulates from the cold

A construction cross-section of a TTE® riding hall

riding hall
Riding hall with elastic layer

Our recommendation:

An elastic layer for increased gentle treatment of the joints

A roughly 10 cm layer of wood chip can be used as an elastic layer (bedding) according to the use. This allows a particularly strong spring effect for pleasant, easy on the joints and low wear riding. The elastic layer also insulates from the cold.